MoG Target High Abrasion ErgoShield Tactical Gloves
- Almost gone!
The MoG Target High Abrasion ErgoShield (model 8110) is a slim-fit tactical shooting glove from Masters of Gloves, the Belgian glove specialist. It takes the Target High Abrasion and adds ErgoShield: low-profile, 3D-moulded TPR guards over the knuckles and the backs of the fingers that protect against knocks, bumps and pinches without adding bulk.
The palm is MoG's ArmaSuede, a single 0.8mm layer of synthetic leather co-developed with AX Materials and rated to more than 8000 abrasion cycles. A mixed silicone print grips weapons, ropes and kit when hands are wet or sweaty, and the thumb, index and middle fingertips work on touchscreens. MoG developed the Target series with Special Forces and law enforcement users in training across different environments.
Shown here in genuine Multicam®, the glove is certified to EN 388:2019 (4121X) for mechanical risks and EN 407:2020 for contact heat up to 100°C for 10 seconds. A reinforced pull tab with a metal eyelet helps you get the gloves on and clips them to a belt or carabiner when they're off.
Key Features
- ErgoShield Impact Protection - 3D-moulded, low-profile TPR guards over the knuckles and finger backs against knocks, bumps and pinches
- ArmaSuede Palm - Single-layer 0.8mm synthetic leather rated to 8000+ abrasion cycles
- Mixed Silicone Grip - Secure hold on weapons, ropes and textiles, even with sweaty or wet hands
- Slim-Fit Fingers - Stitched over the fingertips for close trigger and equipment control
- Touchscreen Fingertips - Conductive thumb, index and middle fingertips for phones and devices
- C-Grip and Reload Thumb - Reinforced index finger against hot barrels and a reinforced thumb for magazine changes
- Trigger Guard Reinforcements - Extra durability where the glove meets the trigger guard
- 4-Way Stretch Back - Breathable, quick-drying nylon and spandex for all-day wear
- Neoprene Cuff - Free wrist movement with basic impact protection and a hook and loop closure
- Reinforced Pull Tab - Metal eyelet for pulling the gloves on and clipping them to a belt or carabiner
Ideal For
- Shooting and Weapon Handling - Close finger control with knuckle protection on the range or in training
- Military Users - Field and vehicle work where knocks to the back of the hand are common
- Police and Law Enforcement - Patrols, searches and entry work that call for dexterity and protection
- Security and Customs - Search and handling duties that need grip and touchscreen use
- Airsoft - A slim, protective glove that keeps full trigger feel
Technical Specifications
| Brand | Masters of Gloves (MoG) |
|---|---|
| Model | Target High Abrasion ErgoShield |
| MPN | 8110 |
| Colour | Multicam® |
| Impact Protection | ErgoShield 3D-moulded TPR on the knuckles and finger backs |
| Palm | MoG ArmaSuede synthetic leather, single layer, 0.8mm, 8000+ abrasion cycles |
| Back of Hand | Nylon and spandex 4-way stretch, breathable and quick-drying |
| Grip | Mixed silicone print on the palm and fingers |
| Cuff | Neoprene with hook and loop closure |
| Touchscreen | Conductive fingertips on the thumb, index and middle finger |
| Pull Tab | Reinforced opening with metal eyelet, doubles as a belt or carabiner fixing point |
| Heat Protection | Contact heat to 100°C for 10 seconds |
| Standards | EN 388:2019 (4121X), EN 407:2020 (X1XXXX), EN ISO 21420:2020 |
| PPE Category | II (moderate risks) |
| Fit | Unisex, slim fit |
| Sizes | S (7), M (8), L (9), XL (10), XXL (11) |
| Care | Not washable. Store cool, dry and out of direct light |
| Warranty | 1 year |
Size Guide
| S (7) | Hand circumference 170mm, hand length 170mm |
|---|---|
| M (8) | Hand circumference 200mm, hand length 180mm |
| L (9) | Hand circumference 210mm, hand length 185mm |
| XL (10) | Hand circumference 230mm, hand length 195mm |
| XXL (11) | Hand circumference 260mm, hand length 205mm |
Measure around the widest part of your hand, below the knuckles, and from the wrist crease to the tip of the middle finger. If you are between sizes, choose the larger. The full chart is on the MoG Target High Abrasion size guide.
Warranty
These gloves are covered by a 1 year warranty against manufacturing defects in materials and workmanship. If they fail because of a manufacturing defect within that period, they will be repaired or replaced free of charge. If you believe you have a warranty claim, please contact sales@taskoutdoor.co.uk with your order number and a description of the fault. The gloves may need to be returned for assessment, which can result in a short processing delay. Please keep your order confirmation as proof of purchase. This warranty does not affect your statutory rights under the UK Consumer Rights Act 2015.
Warranty Exclusions
- Normal wear and tear, including palm and fingertip wear from extended use
- Damage resulting from accident, misuse or improper care, including washing
- Use outside the gloves' intended application, including chemical, biological, electrical or high-impact hazards
- Gloves that have been altered or modified
Also known as MoG 8110 gloves, MoG ErgoShield gloves, Multicam shooting gloves, knuckle protection tactical gloves and touchscreen combat gloves.
Easy & Secure Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.